Fan Assembly - HP 15-fb0 Series Maintenance And Service Manual

To install the speakers, reverse this procedure.

Fan assembly

To remove the fan assembly, use this procedure and illustration.
Table 6-5 Fan description and part number
Description
Fan assembly
Before removing the fan assembly, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the fan assembly:
1. Remove the power connector cable and WLAN antenna cables from the clips in the fan assembly (1).
2. Disconnect the fan cables from the system board (2).
3. Remove the six Phillips M2.0 × 3.5 screws (3) that secure the fan assembly to the computer.
Preparation for disassembly on page
Bottom cover on page 36).
36).
Battery on page 38).
Spare part number
N13304-001
Fan assembly 45