Using Your Printer; Using The Card Reader - Intermec PW40A Quick Start Manual

Using Your Printer

1 Put the mobile computer in the holder on the printer.
2 As you use the printer the power comes from the battery in
the printer. When the printer battery runs down the printer
will not operate until the battery is recharged.

Using the Card Reader

The magnetic card must meet the following ISO standards:
7810 (physical characteristics) 7811 (recording techniques) and
7816 (smart card standards).
Slide the card down into the reader with the magnetic tape to
the right side. The following tables show the LED and audible
read alert descriptions.
Card Reader LED Indicators
LED Indicates
Green Good read
Red Read failed, try again, if it continues to fail call Intermec Technical
Support (1-800-755-5505) for assistance
10 PW40A Printer Quick Start Guide