Connecting Easylan Wireless To Your Pc; Setting Network Communications And Security - Intermec EasyLan AW02 Quick Start Manual

Connecting EasyLAN Wireless to Your PC

To initially configure EasyLAN Wireless, you must connect its
serial port to your PC's serial port.
The EasyLAN Wireless serial port uses PC-compatible 9-pin
male D-connectors. You can order a 9-pin female to 9-pin
female serial cable from Intermec (P/N 059167).
To connect EasyLAN Wireless to a serial port
• Plug one end of the serial cable into the serial port of
EasyLAN Wireless and the other end into the serial port of
your PC.

Setting Network Communications and Security

This section explains how to initially configure your EasyLAN
Wireless to communicate with your network using the EasyLAN
Network Setup configuration wizard.
Note: For help configuring EasyLAN Wireless using
a UNIX workstation, see the EasyLAN Wireless User's
Manual.
To set network communications and security
1 Install EasyLAN Network Setup on your PC from the
PrinterCompanion CD that came with your printer.
2 On your PC, choose Start > Programs > Intermec EasyLAN
Network Setup. The Introduction screen appears.
14 EasyLAN Wireless Quick Start Guide