Disclaimer - Parker DN80 Installation, Operation And Maintenance Manual

IOM 13
Reference Number:

Disclaimer

PLEASE NOTE:
If the valves produced by Parker Hannifin Bestobell Valves/LNG are refurbished by a third party
organisation that is not approved by Parker Hannifin Bestobell Valves/LNG, then the safety and
performance will not be guaranteed and the warranty may be invalid.
If unsure about the installation and operation procedures for this valve, please contact Parker
Hannifin Bestobell Valves/LNG.
Parker Hannifin Bestobell Valves has produced this manual in order to provide engineering personnel
with sufficient general information to enable the operation, installation and effective maintenance of
the valve manufactured by Parker Hannifin Bestobell Valves.
In the interest of product development, the designs and specifications for our products are constantly
under review and we therefore reserve the right to make changes and improvements without notice.
This manual and the copyright therein are the property of Parker Hannifin and all information that it
contains is confidential.
This manual must not be reproduced or disclosed nor must any information taken there from be
disclosed, without prior consent in writing of Parker Hannifin.
Parker Hannifin – Instrumentation Products Division Europe
President Park, President Way, Sheffield
South Yorkshire, S4 7UR, United Kingdom
Tel: +44 (0) 114 224 0000 www.parker.com/ipd
Date of Issue: 18 November 2021
Globe Valve DN80
This document has been authorised for use by:
Name: Vinay Vallabhajosula
Title: Engineering Manager
Signed:
Date: 19/11/2021
Page 4 of 25
Date: 26 February 2013 Issue:
QF 80: Issue 2
A