Page 1
为了安全和让安装和替换变得容易,Moen建议 Image is for reference only 您使用以下工具: (Style varies by model) HELPFUL TOOLS For safety and ease of replacement, Moen rec- ommends the use of these helpful tools. 记录购买的型号: (保存安装说明书以备将来参考) Record Purchased Model Number: (Save instruction sheet for future reference) 护目镜...
Page 3
① ② ③ 2-Φ 6mm Depth 孔深 :35mm ④ ⑤ ⑥ 安装固定座: 组装管组件: 1. 如图示,标记并在墙壁上钻2个安装孔,深度为35mm。 1. 拆下滑座。 2. 在安装孔内分别打入膨胀管,然后用自攻螺钉分别将上下固定 2. 安装下墙座。 座固定在墙上,拧紧螺钉。 3. 重新套回滑座。 4. 上弯管套入上墙座。 5. 下直管组件旋入上墙座。 6. 锁紧紧定螺钉,调整上、下墙座的方向使其保持一致。 Install the fixing ring: Assemble the tubes: 1. As left figure, mark the location of drilling on the wall.Drill two 1.
Usage Instructions and Caution 产品使用说明和注意事项 Usage of Diverter: 切换阀的使用方法: 1. Take off the hand shower, and do not let the water 1. 取下手握花洒,注意出水方向不要对准人。拉出提拉 towards people. Pull out the handle of diverter valve, 阀的把手,打开水源,调温试水,检验淋浴器密封性。 turn on the water source, adjust the water temperature, 2.