Character Set Selection - Intermec EasyCoder E4 Programmer's Reference Manual

11. Character Set Selection

EasyCoder E4 Direct Protocol v2.10 – Programmer's Reference Manual
The NASC command selects a character set that decides how
the various characters will be printed. This command makes
it possible to adapt the printer to various national standards.
Most resident character sets are illustrated in Chapter 11.1. For
information on how to create user-defi ned character sets, refer to
Chapter 9.2. Sets marked with € in the list below supports the
Euro currency sign.
NASC <char. set no.> | <"fi le name">
<char. set no.> Character set
1 Roman 8 (default)
33 French
34 Spanish
39 Italian
44 English
46 Swedish
47 Norwegian
49 German
81 Japanese Latin (romají)
240 Microsoft Hebrew
241 Microsoft Arabic
351 Portuguese
850 MS-DOS Latin 1
851 MS-DOS Greek 1
852 MS-DOS Latin 2
855 MS-DOS Cyrillic
857 MS-DOS Turkish
862 MS-DOS Hebrew
1250 Windows Latin 2 (Central Europe)
1251 Windows Cyrillic (Slavic)
1252 Windows Latin 1 (ANSI)
1253 Windows Greek
1254 Windows Latin 5 (Turkish)
1255 Windows Hebrew
1256 Windows Arabic
1257 Windows Baltic Rim
-1 PCMAP
-2 ANSI
<"fi le name"> Character set
the name of a user-defi ned character set fi le or one of the following:
"OCR-A.NSC" OCR-A BT
"OCR-B.NSC" OCR-B 10 Pitch BT
"ZAPF.NSC" Zapf Dingbats BT
Chapter 6 Setting Up the Printer
Remarks
€
€
€
€
€
€
€
€
€
[not documented]
[not documented]
€
[not documented]
€
€
€
€
€
[not documented]
[not documented]
€
€
Remarks
55