SST Bench Mount Kiosk Component descriptions LCD Screen Swipe Card Reader BNA Enclosure Time of Flight Scanner Kiosk Inlet Bracket Printer Betslip Reader SST Bench Mount NeoProducts Pty Ltd ACN 007 152 374 ABN 76 007 152 374, 62-66 Pacific Drive, Keysborough, Vic, 3173 Telephone 03 9701 1511 www.neoproductsgroup.com 15301 Betmakers SST_Bench Mount Quick Start Guide_ECN 5993...
Page 3
CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Unpacking Bench Mount Kiosk Remove the strapping from the Bench Mount carton. Caution: The strapping is under tension and can flick when cut.
CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Installation Remove SST Bench Mount from packaging. Remove & discard the packaging tape & cardboard. Remove & discard the foam packaging from SST Bench Mount.
Page 5
CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Installation (continued) Select 2x M6 Black Clamping Knob from Packaging Kit. With the second person standing at the rear of the Kiosk, instal 2x M6 Black Clamping Knobs onto Studs and firmly hand tighten (Note: Peripheral Drawer assembly removed for clarity).
Page 6
CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Installing BNA Enclosure Remove the BNA Mount from the carton. Remove the documentation from the foam packaging and retain for future reference. Discard the foam packaging &...
Page 7
CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Installing BNA Enclosure (continued) Pre-feed the Looms into the hole of the Kiosk as shown. Select 3x M6 Black Clamping Knob from Packaging Kit.
Page 8
CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Installing BNA Enclosure (continued) Before Push Switch Push Button into the #1 port on the D-Link Hub 7 Port as shown. After Power up the Kiosk Power, Network ports are accessed from the LH side...
CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Power up the Kiosk (continued) Unlock and open the LCD Screen Door and Lower Door by unlocking the Lock at the Right-hand side of the Kiosk using the key provided.
Page 10
CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Loading printer paper (continued) Remove the paper spindle from the Packaging Kit. Slide the paper roll onto the paper spindle and install into roller supports.
Page 11
CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Location of Modem and inserting SIM Card To access the Modem, unlock and open the LCD Screen Door by unlocking the Lock at the Right-hand side of the Kiosk using the key provided.
CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Monitor adjustment To access the LCD Screen Monitor adjustment buttons, unlock and open the LCD Screen Door by unlocking the Lock at the Right-hand side of the Kiosk using the key provided The LCD Screen Adjustment buttons are located Menu...