Table of Contents
Advertisement
2.4
Assembling-color plates
Introduction
The color-coding plates allow you to individually color code the PROFINET IO interfaces in
accordance with company and national regulations. The color-coding plates are available in
white, red, yellow, yellow-green, brown, blue and turquoise. You can provide every
PROFINET IO interface on the PN/PN coupler with a color-coding plate.
The color-coding plates are positioned on the bottom right of each PROFINET IO interface.
Required tool
Screwdriver 3.5 mm blade width
Assembling color-coding plates
1. Use the screwdriver to push the spigot of the color-coding plate into the opening provided
2. Secure the color-coding plate as described below.
3. Bend the star-shaped support up by approx. 30° to 40°.
4. Detach the color-coding plate by moving the support this way and that.
Disassembling color-coding plates
Use a screwdriver to lever the color-coding plates from their supports.
See also
Order numbers and accessories (Page 89)
PN/PN coupler
Installation and Operating Manual, 06/2010, A5E00717043-04
for this in the PN/PN coupler.
Assembling
2.4 Assembling-color plates
17
Advertisement
Table of Contents
