Table of Contents
Advertisement
height. Consult your Yamaha dealer or boat
manufacturer for further information on deter-
mining the proper mounting height.
ECM01634
NOTICE
Make sure that the idle hole is high
G
enough to prevent water from entering
the engine even if the boat is stationary
with the maximum load.
Incorrect engine height or obstructions
G
to the smooth flow of water (such as the
design or condition of the boat, or ac-
cessories, such as transom ladders or
depth finder transducers) can create air-
borne water spray while the boat is
cruising. If the outboard motor is operat-
ed continuously in the presence of air-
borne water spray, enough water could
enter the engine through the air intake
opening in the top cowling to cause se-
vere engine damage. Remove the cause
of the airborne water spray.
ZMU01762
Installation
40
Advertisement
Table of Contents
