Table of Contents
Advertisement
48
advanced features
Tuner Set
The VCR needs to find, identify and memorise all available stations in your area in order to
record programmes correctly. Once done, pressing the
jump to the available channels without going via any vacant channels. This channel search
can be done either automatically or manually. You should only need to perform either of the
following procedures if Auto Setup or Preset Download has failed to identify and record
available channels or you have moved to a new area.
Auto Channel Setup
get to the main menu
perform auto channel set
using the
SET
rf and scart connection
VCR to the TV with both the RF Cable and a 21-pin SCART Cable
(not provided) and the TV set is in its AV mode (see the TV
manual), the
there for about 4–12 minutes while the VCR searches for receivable
stations. During Auto Channel Set the S mark on the screen moves from left to right.
[MENU]:EXIT
search, the confirmation screen will appear showing the details
(
= Preset Number,
PR
Name) of the TV stations that the process has found. The first
station will have a highlight bar over it and will be blinking. This
screen and the programme currently being broadcast on the
selected station will alternate at 8 second intervals. To view the
next channel, press the
highlight bar to the required channel.
return to normal screen
NOTES ON CHANNEL RECEPTION
incorrect station id
names may not be stored correctly by the VCR and Auto Guide Program Number Set may not
work properly. If the Guide Program Numbers are not set, entering a PlusCode number, may
result in an incorrect channel being recorded.
poor reception
quality is poor, you can delete that station from the memory (see page 50).
Press
Move the highlight bar to
and
buttons and press
PR
PR
If you have chosen to connect the
screen will appear on the TV and remains
AUTO SET
note: If you have connected both the RF cable and the fully-wired
21-pin SCART cable, and if your TV offers T-V Link, etc., and the
TV is turned on, the VCR automatically performs the Preset
AUTO SET
Download (
PLEASE WAIT
function.
The caption
about 5 seconds.
confirmation screen
= Channel Number and
CH
and
PR
Press
In certain reception conditions, station
The VCR memorises all stations found regardless of their quality. If a station's
.
(or E) twice.
pg. 11) even if you select "Auto' for Auto Setup
SCAN COMPLETED
= Station
ID
buttons to move the
PR
.
or
buttons enables you to
PR
PR
AUTO CH
MODE SET
F
AUTO CH SET
MANUAL CH SET
INITIAL SET
[1] a k
[MENU]: EXIT
appears at the end of the process for
Once Auto Channel Set has completed its
PR
CH
01
26
02
33
03
23
04
30
05
37
06
07
[10]
a k: EDIT
a [x]: DELETE
[MENU]: EXIT
MAIN MENU
ID
PR
CH
ID
BBC1
08
- - - -
BBC2
09
- - - -
ITV
10
- - - -
CH4
11
- - - -
CH5
12
- - - -
- - - -
13
- - - -
- - - -
14
- - - -
Advertisement
Chapters
Table of Contents
