Table of Contents
Advertisement
7.4 Quick
With this option you can decrease the
programme duration.
Use this option for items with daily soil.
The related indicator comes on.
7.5 Super Quick
With this option you can decrease the
programme duration.
Use this option for items with light soil or
items to refresh.
The related indicator comes on.
7.6 Rinse Only
With this option you can perform only a
last rinse of a selected washing
programme.
If you set also the Extra Rinse function
(
) the appliance adds two or more
rinses.
The related indicator comes on.
7.7 Drain & Spin
With this option you can perform the
spin and drain cycle.
8. SETTINGS
8.1 Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
• To activate/deactivate this option
touch the buttons Spin and Option at
the same time until the indicator
comes on/goes off.
8.2 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option,
touch the buttons Temp. and Spin at
the same time until the indicator
comes on/goes off.
1) See in "Settings" how to activate this option.
The spin phase is suitable to the washing
programme you set.
If you set also the No Spin
option (
) , the appliance
only drains.
7.8 Finish In
With this option you can set the number
of hours in which you would like your
washing programme to be completed.
You can set from minimum 3 hours to
maximum 20 hours.
The display shows the number of hours
and the indicator above the button
Finish In is on.
7.9 Extra Rinse
With this option you can add some rinses
to a washing programme.
Use this option for persons allergic to
detergents and in areas where the water
is soft.
The related indicator comes on.
Activate this option after you touch the
button Start/Pause : the buttons are
locked (except for the button On/Off ) .
This option stays active even
when you switch off the
appliance.
8.3 Acoustic signals
The acoustic signals operate when:
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, touch the buttons Programmes
and Temp. at the same time for 4
seconds.
ENGLISH
11
1)
Advertisement
Table of Contents
