8. Disassembly and Assembly Procedures (P2422Hc)
NOTE:
This "Disassembly and Assembly Procedures" is for EMEA only, not for other regions. Please
note that Dell will deem warranty void if any disassembly is done on the monitors.
Tools Required
List the type and size of the tools that would typically can be used to disassemble the
product to a point where components and materials requiring selective treatment can be
removed.
Tool Description:
Screwdriver (Phillip-head, Hexagonal head)
−
Penknife
−
8.1 Disassembly Procedures (P2422Hc)
Step
Remove
the
Base ass'y.
.
Figure
- 20 -
Tool
Remark
Push the button
and pull out the
stand.
Note:
Put the monitor on
a flat, soft and
clean surface.
Unscrew the 4
screws by the
Philips-head
Screwdriver.
Torque=6±1kgf.cm