Emptying The Dirt Tank - Bissell CLEANVIEW SWIVEL REWIND PET REACH Manual

Using the Vacuum
(continued)
Above Floor Cleanining
Clean hard-to-reach spaces with the Quick Release Extension Wand.
1. Push the release button to
remove and attach desired
tool.

Emptying the Dirt Tank

We have additional tips for maintaining your machine at support.BISSELL.com.
1. Press the tank release
button and pull out to remove
dirt tank.
4. Clean cyclone with warm
water and mild detergent.
Let dry for 24 hours before
reinstalling.
WARNING
before performing maintenance or troubleshooting checks.
2. The hose can be removed
from the extension wand. To
do so, twist circular hose cuff
counter-clockwise and remove
from handle.
2. Hold the dirt tank over
a trash container. Press the
bottom release button to empty.
Once empty, close the lid.
5. Twist cyclone counter-
clockwise to reinstall.
To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical outlet
3. Attach desired tool.
Note: For optimal use, attach
the Pet TurboEraser® Tool
directly to the hose instead of
the wand.
3. Twist cyclone clockwise
and pull down to remove from
tank.
6. Place tank back on vacuum
and press firmly until it clicks
into place.
BISSELL.com 5