Motorola MBP160 Quick Start Manual

Motorola MBP160
GENERAL QUESTIONS
Cannot hear sound or baby cry from the parent unit
• The volume level in the parent unit may be set too low, increase the volume level of the parent
unit.
• The parent unit and the baby unit may be out of range with each other. Reduce the distance
between the units, but not closer than 1 metre.
How Do I Adjust The Belt Clip To Use It As A Stand Or How Do I Turn The Stand Into A Belt Clip?
1. Lift up the belt clip and rotate it clockwise until you hear a click for the stand or desk mount.
2. Lift up the belt clip and rotate it counterclockwise until you hear a click for the belt clip.
Is The Signal Between The Parent Unit And The Baby Unit Secure?
Yes, the signal transmitted between the baby unit and parent unit is digitally secure and therefore
safe from unauthorized access.
Low battery light on the parent unit screen flashes
Battery pack in the parent unit is running low. Connect the parent unit to the mains power with the
supplied power adaptor for recharging.
Power Indicator on the parent unit does not come on
• Check whether the parent unit is powered on.
• Check whether the supplied battery pack is correctly installed and that they are not drained.
• Recharge the parent unit by connecting it to the power supply.
Power/Link Indicator on the baby unit flashes
• The baby unit may be not paired to the parent unit.
• The parent unit and the baby unit may be out of range with each other. Reduce the distance
between the units, but not closer than 1 meter.
• The baby unit may be powered off. Press and hold to power on the baby unit.
Please contact our customer service team for queries, warranty, support or service related to the
product at +44(0) 844 557 0890 (UK - calls cost 7p per minute plus your telephone company's
standard access charge). Calling from ROI please dial +44(0) 8187 62092.
Email: support@motorolahome.com. Web support at www.motorolastore.support/en