Page of 2
Download Bookmark Comment

Intermatic ST01 User Manual

Intermatic st01 security timers: user guide.
Hide thumbs
   
Self-Adjusting Wall Switch Timer
MODEL ST01 Series
Easy-Set Guide
This Easy-Set Instruction Sheet may be helpful in setting up common timer programs.
Refer to the Installation and User Instructions Sheet for more information.
To Clear the Timer
1.
16.
Press and hold down the ON/OFF button.
Press ON/OFF to review Dawn time.
17.
2.
Using a paper clip or pen, press and release
Press ON/OFF twice to review Dusk time.
the RESET button, which is to the lower right of
18.
Press ON/OFF twice to save.
the + button.
3.
Continue holding ON/OFF until you see INIT on
Programming Dusk ON/Dawn OFF
the screen.
4.
1.
Press MODE to display PGM.
Release ON/OFF.
5.
2.
Press ON/OFF three times to choose DUSK.
Wait until you see 12:00 am in MANual mode.
3.
Press ON/OFF to choose the days you need,
then press + to change days from ALL, M-F,
Setting the Time and Date
WeeKenD, or individual day.
4.
Press ON/OFF to SAVE your work.
1.
Press MODE to display SETUP.
5.
Press + to go to Program 2.
2.
Press ON/OFF.
6.
Press ON/OFF twice to display DAWN.
3.
Press + or – to set your hour for the current
7.
Press ON/OFF to choose the days you need,
time of day.
then press + to change days from ALL, M-F,
4.
Press ON/OFF.
WeeKenD, or individual day.
5.
Press + or – to set your minutes for the current
8.
Press ON/OFF to SAVE your work.
time of day.
9.
Press MODE to display AUTO.
6.
Press ON/OFF.
7.
Press + to advance the year if needed.
8.
Press ON/OFF.
Programming Dusk ON/Fixed Time OFF
9.
Press + or – to change the month.
1.
Press MODE to display PGM.
10.
Press ON/OFF.
2.
Press ON/OFF three times to choose DUSK.
11.
Press + or – to change the date.
3.
Press ON/OFF to choose the days you need,
12.
Press ON/OFF. Make sure it's the correct day of
then press + to change days from ALL, M-F,
the week. If not, go back and check the year.
WeeKenD, or individual day.
13.
Press ON/OFF to choose DST (Daylight Saving
4.
Press ON/OFF to SAVE your work.
Time)
5.
Press + to go to Program 2.
Press + to select Man if you do not observe
6.
Press ON/OFF twice to display DAWN.
DST, or
7.
Press + until you get to 12:00 pm.
Press + again to select Auto to automatically
8.
Press ON/OFF.
set for DST.
9.
Press + or – to set the hour of the OFF time.
14.
Press ON/OFF to choose zone.
10.
Press ON/OFF.
15.
Press + to select your zone. (Refer to map in
the Install Sheet for proper zone).
(Continued on the back)

   Related Manuals for Intermatic ST01

   Summary of Contents for Intermatic ST01

  • Page 1

    MODEL ST01 Series This Easy-Set Instruction Sheet may be helpful in setting up common timer programs. Refer to the Installation and User Instructions Sheet for more information. To Clear the Timer Press and hold down the ON/OFF button. Using a paper clip or pen, press and release the RESET button, which is to the lower right of the + button.

  • Page 2

    Press + or – to set the minutes of the OFF time. Press ON/OFF to choose the days you need, then press + to change days from ALL, M-F, WeeKenD, or individual day. Press ON/OFF to SAVE your work. Press MODE to display AUTO. Programming Fixed Time ON/Fixed Time OFF Press MODE to display PGM.

Comments to this Manuals

Symbols: 0
Latest comments:
  • Rick Loewen Dec 27, 2014 12:00:
    the programmin​g is yes simple only by means of following the steps ; but very easy to miss a step. Also not impressed that there is no way of running a test after you have programmed the setup.
  • laird brown Jun 12, 2014 08:10:
    doesn't tell me how to modify a program, or how to switch from one program to another.
  • janny klein Dec 06, 2013 10:30:
    hi, what zone are we in? I'm in CA?... thanks