Table of Contents
Advertisement
Heating and Continuous- Fan Speed the Same
If it is necessary to operate the heating speed and continuous--fan
speed using the same blower speed, connect a jumper between the
"Heat" and "Cont" terminals on the electronic fan control.
12. Furnace Maintenance
!
FIRE,
EXPLOSION,
POISONING HAZARDS.
Failure
to
follow
result in personal injury, death and/or property
damage.
It is recommended that the furnace be inspected and
serviced on an annual basis (before the heating
season) by a qualified service agency.
See "User's Information Manual".
441 01 5003 01
OR CARBON MONOXIDE
this
warning
could
Specifications are subject to change without notice
Note: There should be only ONE motor lead going to the "Heat" and
"Cont" terminals.
!
ELECTRICAL SHOCK, FIRE OR EXPLOSION
HAZARD.
Failure to follow this warning could result in
dangerous operation, personal injury, death or
property damage.
Improper servicing could result in dangerous
operation, serious injury, death or property damage.
• Before servicing, disconnect all electrical power to
furnace.
• When servicing controls, label all wires prior to
disconnecting. Reconnect wires correctly.
• Verify proper operation after servicing.
27
Advertisement
Table of Contents
