Function Check - Electrolux T4190 Installation Manual

Function check

Check that the drum is empty and the door has
been closed.
Start the dryer
Check that the door switch is working. The drum
must stop if the front door is opened.
Check the direction of rotation
This is done by selecting the "No heat"
Fig
programme.
1
• Start the dryer. Leave the dryer running for 30
seconds.
• Open the door quickly. Observe the direction
of rotation of the drum is clockwise.
Isolate the machines electrical supply - swap the
positions of the incoming supply phases at the
main terminal block - re-establish the supply and
re-test.
Final test
• Let the dryer work for 5 minutes on a program
that requires heat.
• Check that the heating is working by opening
the front door and feel the heat.
If the above test-points are in order, the dryer is
ready for use.
Service organisation / dealer
If defi ciencies or a fault are detected, please
contact your local service organisation / dealer.
Function check
1
6311
21