Advertisement
7. Start wash
• Press
to start the wash programme
OR set Delay start
• Press
to enter delay start. Press
again to increase the time (in
hours).
For more detail, see user guide:
'Setting Delay
start'
To cancel a wash once it has started
• Press
to cancel the programme.
- - - will show in the display, then
the wash progress indicators will go
out and the display will turn off.
• If you wish, you can start a different
programme.
https://producthelp.fisherpaykel.com/au/Clean/Dishwashers/DW60FC2X1/Quick_Start_Guide_DW60FC2X1/03_Using_your_...
To pause and restart a wash
programme
• Press to pause the programme.
• The programme status (eg
Wash) will flash while the
dishwasher is paused. Open the
door very slowly.
There is
a risk of
being
sprayed
with hot
water.
Do not
fully
open
the door
until the
spray
arms
have
stopped
rotating.
• Load, remove, or rearrange any
dishes if needed.
• Press
to restart the programme. If the
dishwasher is not restarted within
7 minutes, it will then beep until
the cycle is restarted.
After the wash has ended
1. The dishwasher will beep. The display
. After 30 seconds the display will turn
2. Open the door slightly and leave aja
drying. Once cooled, unload dishes
For more detail, see user guide:
'After the
wash'.
• Check condition of dishwasher, clean if
Updated: Thu, 28 Jul 2022 05:48:20 GMT
Powered by
3
Advertisement
