Name | model P a g e | 1 Contents Thank You ....................2 This manual ................... 3 The Ellia 3000 ..................4 Overview ............................. 4 Safety Instructions .................. 5 Contents of box ..................7 Assembly Instructions ................8 Handle Assembly ..........................8 Step 1.
This manual This manual provides practical instructions for the safe use of the Ellia 3000. It must be read and applied in its entirety to ensure the safe use of the Ellia 3000 in small scale agricultural settings. Users of the Ellia 3000 do so at their own risk and acknowledge the use of the Ellia 3000 involves risks.
Ellia 3000Hand-E | MODEL V2021 Name | model P a g e | 4 The Ellia 3000 Overview A. Handle B. Throttle/Trigger Squeezer C. Drill Holder D. Roller/Scraper E. Main Body F. Chain Guard G. Chain H. Scratcher Attachment Curly’s Ag – Agricultural Innovations | www.curlysag.com | info@curlysag.com...
We highly recommend that no loose clothing be worn when operating the Ellia 3000. 3. Do not operate the Ellia 3000 if you have not read or do not understand its manual. 4. Do not operate any equipment if you are subject to seizures, loss of consciousness or fainting.
Page 7
Name | model P a g e | 6 5. Do not use the Ellia 3000 if you are under the influence of alcohol, drugs (including prescription medications), controlled substances or are fatigued. 6. Do not allow children (under the age of 16) to operate the Ellia 3000 at any time.
Ellia 3000Hand-E | MODEL V2021 Name | model P a g e | 7 Contents of box *Please note that the tools (as per red box) are not included in the contents of this box and do not come as part of the product.
Ellia 3000Hand-E | MODEL V2021 Name | model P a g e | 8 Assembly Instructions You will need some tools – A Cordless Drill to use with the machine, 13mm (1/2”) and 17mm (11/16”) Spanner or Socket, Phillips head screwdriver, and Allen keys (a small rubber tipped hammer may also be need).
Ellia 3000Hand-E | MODEL V2021 Name | model P a g e | 9 Step 2. Take the upper arm (2) and attach it to the Lower Arm (3), make sure you take out the nut and bolt first. Slide together so that the pre-drilled bolt holes align, (note that there is a small black mark to help align the holes –...
Ellia 3000Hand-E | MODEL V2021 Name | model P a g e | 10 Step 2. Insert the bolt and washer into the mount hole and into the Main Body (E) and tighten. Insert the wing nut, nut (spacer) and washer into the adjusting mount and into the Main Body (E) and tighten.
Ellia 3000Hand-E | MODEL V2021 Name | model P a g e | 11 Step 3. Loosen the wing nut on the Drill Holder (C). Slide the holder along the Main Body until the Drill slips into the Holder. Wing Nut Step 4 Pull the cable through so the Trigger rests onto the Drill Trigger (see figure b), (make sure that the other end of the cable is firmly pushed into the actual Throttle)
Ellia 3000Hand-E | MODEL V2021 Name | model P a g e | 12 Figure d Figure e Step 5. Take the cable and wrap it around the Handle stem twice (A), if you are right handed push the throttle (B) onto the right side of the handle, and if you are left handed push throttle onto the left hand side of the handle.
Ellia 3000Hand-E | MODEL V2021 Name | model P a g e | 13 Wing Wing nut and bolt Figure f Figure g Step 2. Once you have uncovered the Chain (G), it will give you access to the rear holding nut (hidden behind the lower sprocket).
Put the Chain Guard (F) back into place and do up the bolt and wing nut. Test that the Ellia 3000 moves smoothly by running it back and forth on a level surface. It should move smoothly. If it seems to not roll smoothly, check that the rollers are level by checking the adjuster bolts (count the holes that the bolts are in to make sure they are the same).
Ellia 3000Hand-E | MODEL V2021 Name | model P a g e | 15 Latch, pull out Figure h Step 2 Push the whole attachment outward (towards the sprocket end) – Caution some of the attachments are sharp use safety gloves for protection. (See figure i). Figure i Curly’s Ag –...
Page 17
Bearing Holder Figure j Flip the Ellia 3000 back over and re install the chain guard (F) into place making sure they are tight. Now you can re attach the drill or the battery and you are ready to use.
Reminder: you can change the Handle position and the Roller heights as required when on the fly. Maintenance As the Ellia 3000 is made from Stainless steel it can be left out in the elements, however we do recommend that you disconnect the drill and take the drill out of the elements.
We value your opinion, please feel free to contact us if you have questions or comments. Website www.curlysag.com Email info@curlysag.com Phone Office Phone +61 493 281 690 Curly's Phone +61 449 268 131 Video Ellia 3000 Assembly Video Ellia 3000 Changing Attachment Video Curly’s Ag – Agricultural Innovations | www.curlysag.com | info@curlysag.com...