Related Manuals for CURLY'S AG Hand-E V2022
Summary of Contents for CURLY'S AG Hand-E V2022
- Page 1 OPERATOR MANUAL Curly’s Cracker Broad Fork / Garden Fork / Harvest Fork www.curlysag.com | info@curlysag.com...
-
Page 2: Table Of Contents
Hand-E | MODEL V2022 Name | model P a g e | 1 Contents Thank you ....................1 This manual ....................2 The Curly’s Cracker ..................3 Safety Instructions ..................3 Assembly Instructions .................. 5 Contents of box ..........................5 Assembly ............................ -
Page 3: This Manual
Hand-E | MODEL V2022 Name | model P a g e | 2 This manual This manual provides practical instructions for the safe use of the Curly’s Cracker. It must be read and applied in its entirety to ensure the safe use of the Curly’s Cracker in small scale agricultural settings. -
Page 4: The Curly's Cracker
Hand-E | MODEL V2022 Name | model P a g e | 3 The Curly’s Cracker The Curly’s Cracker is an all steel heavy duty constructed manual broad fork that allows you to aerate your soil with minimal disruption of natural microbes and respecting soil structure. - Page 5 Hand-E | MODEL V2022 Name | model P a g e | 4 Do not operate the Curly’s Cracker if you have not read or do not understand its Manual. Do not operate the Curly’s Cracker if you are not capable of safely operating this type of equipment.
-
Page 6: Assembly Instructions
Hand-E | MODEL V2022 Name | model P a g e | 5 Assembly Instructions Contents of box A. 2 x Handles B. Base Plate (Tine Holder) C. 2 x M12x50mm Stainless nut and bolt set (for the handles) D. M6x12mm Stainless nut and bolt sets (Qty will depend on how many tines you order) E. -
Page 7: Assembly
Hand-E | MODEL V2022 Name | model P a g e | 6 Assembly Handles 1. Take one of the Handles (A) and insert the end with the hole into the Base Plate hole (B) with the holes ready to be aligned (see Figure 1). This will be a tight interference fit, so you will need to gently tap together using a hammer/mallet until the holes line up (see Figure 2). -
Page 8: Tines
Hand-E | MODEL V2022 Name | model P a g e | 7 Tines 1. Insert the tines (E) into the slots (your choice as to the spacing you require). Making sure they are all the way in so the small recess fits down onto the base plate. -
Page 9: Operating Instructions
Hand-E | MODEL V2022 Name | model P a g e | 8 Operating Instructions Place Curly’s Cracker with the tines into the ground and the handles up, stand on the base plate and balance your weight so that the tines go down into the soil. You may need to jump slightly onto the base plate depending on if the soil is hard or soft. -
Page 10: Warranty
Hand-E | MODEL V2022 Name | model P a g e | 9 Warranty The Curly’s Cracker is warranted under the Curly’s Ag limited warranty of 12 months. No warranty shall, however, apply if the Curly’s Cracker has not been used according to the instruction given in this manual, even if it is within the warranty period.