Connecting A Computer Using A Vesa Cable; Connecting A Usb Type B Mouse; Connecting A Computer Using Bnc Cables - InFocus LP925 User Manual

S e t t i n g
NOTE: If you are connecting an
older Macintosh computer that
has a 2-row 15-pin connector, you
must use a Mac adaptor between
the computer and the projector.
See "Optional Accessories" on
page 44.
NOTE: When all 5 BNCs are
connected, the projector handles
separate synch on H and V. When
4 BNCs are connected, the
projector handles a composite sync
on H. When 3 BNCs are
connected, the projector handles a
composite sync on G.
8
u p t h e

Connecting a Computer Using a VESA Cable

This input is designated Computer VESA.
1 Plug one end of the supplied VESA cable into the video con-
nector on your computer. Plug the other end into the VESA
connector on the projector.
2 If you want audio with your presentation, plug an audio cable
(not supplied) into the audio connector on your computer.
Plug the other end into a
F 5
IGURE
Connecting the projector to a computer using a VESA cable

Connecting a USB type B mouse

You can control the computer's mouse with the projector's key-
pad or remote by connecting a USB mouse cable to the USB con-
nector on the projector (Figure 4 on page 7) and on your
computer. This feature is available for PC Computer RGBHV and
VESA sources only. It is not supported on the Macintosh plat-
form. See page 32 for menu options that apply to a USB type B
mouse.

Connecting a Computer using BNC Cables

Connect the BNC cables to the appropriate RGBHV connectors
on the projector (Figure 4 on page 7) and on your computer.
This input is designated Computer RGBHV.
P r o j e c
In connector on the projector.
A A s
R G B
0 0
BNC BNC G B R
L R L R L R
out In In In
VESA cable
t o r