Advertisement
Step
4 (E)
Locate the auxiliary battery mounting location on the UTV and mount the battery kit with the included carriage
bolts and nuts (Figures 6 & 7).
Figure 6: Intimidator Battery Mounting Location
Step
5
Mount the winch control box to a section of the UTV frame with the electronic contacts easily accessible (Figure 8).
Figure 8: Controller Location
Step
6
Connect the yellow and blue cables f rom the winch to the corresponding contacts on the controller. For cleaner
installation, pre-measure and cut the wires before installing new eyelet connectors. Or, simply loop the cables
and secure them with a zip tie away f rom moving parts (Figure 9).
Figure 9: Electric Cables to Controller
PAG E 3
|
Wi n ch I ns ta l l a ti on
Figure 7: Battery Mounting Hardware
Advertisement
