Fisher & Paykel CI302CTB1 Installation Manual page 21

1
2
5mm
3
PROUD INSTALLATION
Turn the cooktop upside down
on a protective cover.
Apply adhesive foam seal around
the glass overhang, 5mm from
the edge of the glass.
Ensure the adhesive side facing is
down to form a continuous seal
around the cooktop.
Trim the excess sealing material
using a sharp cutter or trimmer
knife.
Take care not to damage the
benchtop.
4
5
6
Gently lower the cooktop into the
cutout ensuring you have access
below the countertop to fit and
secure the brackets.
Locate the side brackets* to the
appropriate slots on the cooktop
chassis. The correct slot height
is determined by the thickness
of your countertop.
Tighten all screws to secure the
cooktop to the countertop.
Ensure cooktop is level.
*The number of brackets varies based on your cooktop model.
21