General Specifications - Citizen CMP-10 User Manual

2. GENERAL SPECIFICATIONS

Feature
Printing system
Printing speed
Printing head
Emulation
Characters
Characters per line
Dot matrix
Bar code type
Paper feed system
Paper width
Paper thickness
Recommended paper
Paper roll maximum diameter
Minimum core diameter
Interfaces
IrDA Interface
Direct thermal printing
50 mm/sec
Total dots: 384
Dot density: 8 dots/mm
Printing width: 48 mm
ESC/POS commands plus extra commands for specific
printer features
ASCII Code, Alphanumeric characters,
International characters, Windows Code page
FONT A: 32 characters/line, FONT B: 42 characters/line
FONT A: 12H × 24V, FONT B: 19H × 16V
UPC-A/E, JAN(EAN)13/8 columns, ITF,
CODE39, CODE128, CODABAR, CODE93
Friction feed
58 ±0.5 mm
60 - 65 µm
TF50-KS-E2D (Nippon Paper)
40 mm (CMP-10-×4), 50 mm (CMP-10-×5)
8 mm
IrDA version 1.0
Serial interface (by serial cable - option)
Mode: Infrared transceiver mode
Transport wave: Wave length - 850 to 900 nm
Communication speed: 9600, 19200, 38400, 57600,
Data length: 8 bits
Start bit: 1 bit
Stop bit: 1 bit
Parity: none
Communication: Half duplex
Flow control: IrDA standard
Communication distance: Max. 80 cm
— 12 —
Parameters
115200 bps