Icom IC-R8500 Instruction Manual page 27

Communications receiver
Hide thumbs Also See for IC-R8500:
Table of Contents

Advertisement

D Programmed scan
Programmed scan (and auto memory write scan)
searches for signals within a specified frequency
range, using the selected tuning step increments. The
result is like an 'automatic' rotating of the main dial.
Preparation—setting the scan range:
Push and hold [PROG] to enter the 'prog' bank, then
input the desired edge frequencies, mode and tuning
steps. Refer to p. 27 for details.
Start/stop:
Set the [SQUELCH] control to the threshold point.
Push [PROG] to start the scan.
• "PROG" (and scan range number) appears in the bank
name area.
Push [PROG] again to stop the scan.
Convenient:
Direct range selection —The desired programmed
scan range can be selected using the keypad.
Push a numeral key before or after pushing the
[PROG] key.
Skip scan release —Programmed scan skips all fre-
quencies specified as skip channels in all 1000 chan-
nels.
Auto memory write scan operates in the same way
as programmed scan. However, when a signal is
received, the received frequency is automatically
written into a memory channel in the auto write bank.
Preparation—written memories condition:
Push and hold [AUTO] to enter the written memory
setting condition, then rotate the main dial to select
the condition.
AUTO
START
: Previously written memories
in the 'Auto' bank are saved, then frequencies are
written into the next available channels.
AUTO
CL&START
ories in the 'Auto' bank are cleared, then frequencies
are written into channels, starting from channel 0.
Start/stop:
Set the [SQUELCH] control to the threshold point.
Push [AUTO] momentarily or for 1 sec. to start the
scan.
• CAUTION: Be sure the written memories condition is set
as desired, otherwise previously written memories are
cleared.
• "AUTO" (and scan range number) appear in the bank
name area.
Push [AUTO] again to stop the scan.
Convenient:
The same convenient functions are available as de-
scribed above.
: Previously written mem-
D Auto memory write scan
FM
PROG0
PROG appears
FM
AUTO0
AUTO appears
6
SCANS
Programmed edges
Push [
]
PROG
OFF
DLY
kHz
*NONAME*
AUTO bank
0
1234.567.00
1
1235.678.00
2
1235.890.00
3
4
1240.050.00
---------------
98
---------------
99
Push [
]
AUTO
OFF
DLY
kHz
*NONAME*
24

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents