Setting A Frequency; Preparation - Icom IC-R2500 Instruction Manual

3

SETTING A FREQUENCY

■ Preparation

D Turning power ON/OFF
[PWR• ]
➥ Push [PWR•
] for 1 sec. to turn power ON and OFF.
D MAIN band
The IC-R2500 can receive signals on both the left and right
bands simultaneously.
[MAIN•AGC]
[MAIN•NB]
➥ Push the desired band's [MAIN•AGC] or [MAIN•NB] to se-
lect the main band.
• "Q" indicates the main band.
11
D VFO and memory modes
The receiver has 2 basic operating modes: VFO mode and
memory mode. Select VFO mode first to set an operating fre-
quency.
[VFO/MR•S.MW]
"!" indicator appears when
memory mode is selected
➥ Push the desired band's [VFO/MR•S.MW] to select VFO
mode.
➥ Push [VFO/MR•S.MW] again to select memory mode.
• "!" indicator appears when memory mode is selected.