Table of Contents
Advertisement
1
PANEL DESCRIPTION
BANK SELECT KEY
Sets the [
CH UP
BK S
keys.
• Push this key, then push the [
the desired bank.
• When the optional UT-105 is installed, push one or more
times to select a channel bank for conventional channels
or SmarTrunk II™ channels while pushing [
OPERATING CHANNEL KEYS
Select an operating channel directly without the [
CH 1
] and [
UP
CH DN
CH 2
CH 3
CH 4
SCAN START/STOP KEY
Push this key to start scanning; and push again to
SCAN
stop.
NOTE: Hung the microphone to the microphone
hanger to operate scanning. When release the
microphone, scan will be canceled.
Push and hold this key to indicate the scan group,
then push [
group.
3
] and [
] keys as bank up/down
CH DN
] or [
CH UP
CH DN
BK S
] keys.
] or [
] to select the desired
CH UP
CH DN
SCAN TAG KEY
Adds or deletes the selected channel to the scan
TAG
group.
] to select
• "
longs to the scan group.
PRIORITY CHANNEL KEY
].
Selects a priority A or priority B channel with each
PRI A
push.
PRI B
CH
LOCK KEY
Electronically locks all programmable keys except
LOCK
the [
MONI
MONITOR KEY
Activates the following functions on each channel in-
MONI
dependently:
• Push and hold the key to unmute the channel (audio is
emitted).
• Push the key to toggle the monitor function ON and OFF
(or ON only or OFF only depending on the pre-setting).
OUTPUT POWER SELECTION KEY
Selects the transmit output power temporarily or per-
HIGH
manently depending on the pre-setting.
LOW1
• Ask your dealer or system operator for the output power
level for each selection.
LOW2
" appears above the [
] key when the channel be-
TAG
] and [
] keys.
EMER
Hide quick links:
Advertisement
Table of Contents
