Icom IC-2800H Instruction Manual page 53

y Push [
PRIO] for 2 sec. to start the watch.
(MEM )
• The transceiver checks the memory or call channel frequency
every 5 sec.
• The watch resumes according to the selected scan resume con-
dition. (p. 46)
• "PRIO" and decimal point blinks while receiving a signal on a
watch channel.
MAIN
MAIN
145.320
í
M - L
RX
SCAN
MEM
PRIO
Resume
TON
3.000
43
SEL
M I D - L O
Res
u Push [
PRIO] while the display shows the VFO fre-
(MEM )
quency to stop the watch.
PRIO
MAIN
SCP
12
M
V/M
H
TS
15s
M/C
SCN
MONI
12
LOW
PRIORITY WATCH
q Select the desired band with [BAND].
PRIO
w Select VFO mode with [VFO].
3
e Set an operating frequency.
r Push [SQL Y] or [SQL Z] to set the squelch to
the threshold point.
t Set the watching channel(s).
For memory channel watch:
Select the desired memory channel.
• Select memory mode with [MR]; select the memory
channel to be watched with [Y]/[Z].
For memory scan watch:
Start the memory scan.
• Select memory mode with [MR]; push [w SCAN]
momentarily or [Y]/[Z] for 2 sec. to start memory
scan.
For call channel watch:
Select the call channel by pushing [
for 2 sec.
y Push [e PRIO] to start the watch.
• The transceiver checks the memory or call channel
frequency every 5 sec.
• The watch resumes according to the selected scan
resume condition. (p. 46)
• "PRIO" and decimal point blinks while receiving a
signal on a watch channel.
u Push [e PRIO] or [E CLR] while the display
shows the VFO frequency to stop the watch.
11
CALL]
(MR)
49