ALDI Sempre GT-WS-10s Operating Instructions Manual page 55

The weather station does not
receive any sensor signals.
The display is illegible, the func-
tion is unclear or the values are
obviously incorrect.
In the display, HH / LL is shown in
the display instead of the meas-
ured values for temperature/
humidity.
- Ensure that no electrical disruption sources
are near the sensor or the base station.
- Check the batteries in the sensor.
- Start the radio reception manually: Keep the
CHANNEL button pressed on the base station
until the display for weather data OUT flashes.
You can also keep the TX button pressed in
the battery compartment of the radio sensor
in order to transfer the data to the base sta-
tion more quickly.
- Move the weather station closer to the sensor
or vice versa.
- Reset the weather station to its original fac-
tory settings, see page 51.
- The values are above/below the measure-
ment range, see "Technical data".
55