Table of Contents
Advertisement
4-2. Functions of the "Administrator Settings" Menu
Function
Auto Input Detection
On
Off
DP HPD Control
On
Off
HDMI HPD Control
On
Off
Setting Range
This monitor recognizes the connector through which PC signals
are input and displays images on the screen accordingly. When a
PC is turned off or enters power saving mode, any other available
signal is displayed automatically.
When this function is set to "Off", the monitor displays the signal
from the selected connector regardless of whether a signal is
input or not. In this case, select the input signal to display using
the
operation switch on the front of the monitor.
When a PC is connected via the DisplayPort connector, window
and icon positions may shift when power is turned off/on. If this
happens, set this function to "On".
When a PC is connected via the HDMI connector, the screen
may not be displayed depending on the device. If this happens,
set this function to "On".
Description
- 35 -
Chapter 4 Administrator Settings
Note
• When this function is set to "On", the monitor only
enters power saving mode after all connected PCs
have entered power saving mode or have been
switched off.
-
-
Advertisement
Table of Contents
