To Run Diagnostics From The Ibm Enhanced Diagnostics Diskette; To Run Diagnostics From The Product Recovery Cd Or Program; Replacing The Battery - IBM NetVista X40i User Manual

Ibm netvista x40i: user guide
Hide thumbs Also See for NetVista X40i:
Table of Contents

Advertisement

To run diagnostics from the IBM Enhanced Diagnostics diskette:

1. Turn off your computer and any attached devices.
2. Insert the IBM Enhanced Diagnostics diskette into the diskette drive.
3. Turn on all attached devices; then turn on your computer.
4. Follow the instructions on the screen.

To run diagnostics from the Product Recovery CD or program:

Important
If you are running diagnostics from the product recovery CD and you
have more than one CD, always start with Product Recovery CD 1.
1. If you have a product recovery CD, open the CD drive, insert the CD, and
close the drive. If you do not have a product recovery CD, go to step 2.
2. Shut down your operating system and turn off the computer.
3. Turn on your computer.
Note: If you are using the Product Recovery program, quickly press F11
when the prompt displays during startup (the prompt displays for
only a few seconds).
Wait for the product recovery menu to display.
4. Depending on your operating system, you might be prompted to select a
system setting. If no prompt displays, go to the next step.
5. When the main menu appears, select System Utilities.
6. From the System Utilities menu, select Run Diagnostics. The IBM
Enhanced Diagnostics Program starts. When you are finished running
diagnostics, you will be returned to the Product Recovery program main
menu.
7. Remove any CD from the CD drive and restart the computer.

Replacing the battery

Your computer has a special type of memory that maintains the date, time, and
settings for built-in features. A battery keeps this information active when you
turn off the computer.
The battery requires no charging or maintenance throughout its life; however,
no battery lasts forever. If the battery fails, the date, time, and configuration
information (including passwords) are no longer set. An error message is
displayed when you turn on the computer. See "Lithium battery notice" on
page ix.
Chapter 6. Troubleshooting
71

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netvista x4021796643

Table of Contents