Page 2
Set up IP address and subnet mask of your PC (5 min.) Set up GhostCast server (10 min.) Copy the image file onto the 4287A’s HDD (10 min.) Perform initial setting for the 4287A (15 min.) 8.0 (English version, Enterprise product) 4287A-03...
Page 3
Page 3 of 14 4287A-03 1. Make Boot disks using Symantec Ghost (Required for the first time) 1) Click Start – Programs – Symantec Ghost – Ghost Boot Wizard. 2) Select Network Boot Disk and press the Next button. 3) If HP Ethernet with LAN remote power adapter is installed in the 4287A, select AMD PCNET Family and press the Next button.
Page 4
Page 4 of 14 4287A-03 4) Press the Next button 5) Press the Next button. 6) Press the Next button.
Page 5
Page 5 of 14 4287A-03 7) Select The IP setting ….., and enter IP address 192.168.0.1 and subnet mask 255.255.255.0. Press the Next button. 8) Insert a floppy disk into your PC’s FDD, and the Next button. 9) Press the Next button.
Page 6
Page 6 of 14 4287A-03 In case of selecting 3COM 3c90x: 10) Press the OK button.. 11) Press the Start button. 12) Press the OK button. 13) Press the OK button.
Page 7
Page 7 of 14 4287A-03 14) Press the Close button. 15) Copying File. 16) Insert the second disk into your PC’s FDD, and press OK button.. 17) Press the Start button. 18) Press the OK button.
Page 8
Page 8 of 14 4287A-03 19) Press the OK button. 20) Press the Close button. 21) Copying File. 22) Press the Finish button.
Page 9
1) Double-click “My Computer” icon on Windows desktop of your PC. And double-click Control Panel. The Control Panel window will appear. 2) In the Control Panel window, double-click Network and…, and click Local Area Connection. 3) Press the Properties button. 4287A-03...
Page 10
Page 10 of 14 4287A-03 4) Select TCP/IP and press the Properties button. 5) Select Use the following IP address, and then enter the IP address 192.168.0.2 and subnet mask 255.255.255.0. Press the OK button. 6) Restart your PC.
Page 11
Page 11 of 14 4287A-03 5. Set up GhostCastServer 1) Insert the CD disk (Operating System for 4287A) into your PC’s CD drive (or an external CD drive). Then, copy the image file of the CD disk onto your PC’s HDD (C drive) as a temporary image file.
Page 12
Page 12 of 14 4287A-03 6) Enter session name kobe and client count 1. Then select Restore Image and Disk 7) Click the Accept Client. Then, a message of “Waiting for client to connect…” is displayed.
Page 13
17) A:\GHOST> prompt is displayed. Then, turn the 4287A off. 18) In your PC, Transfer Complete is displayed. Then, click the OK button. 19) Remove the boot disk from the 4287A’s FDD. disk) into the FDD of the 4287A. 4287A-03...
Page 14
19) Follow the instructions for back up mode. 20) The 4287A is restarted. Confirm that a message of “Push ‘R” key to enter recovery mode [R, N]?” is displayed. 21) Confirm that the Instrument Mode is displayed. Then, turn the 4287A off. 4287A-03...