Yamaha REFACE Manual page 10

REFACE EssEntiAl knowlEdgE 06|2015
d e m o n s t r at i o n
reface cs sounds excellent! to demonstrate this, it is advisable to start with a basic setting that focuses exclusively on
the oscillator section. to do this, use the following basic setting for example, in which all sliders - with the exception of
those marked red - are set to their minimum position. with the blue marked sliders from the oscillator section you can
demonstrate very impressively, which sonic possibilities the different oscillator types using [teXtUre] and [Mod] are
able to offer.
a r C h i v i n G
reface cs does not have a memory for selected sound settings. if you want the result of your personal settings held save, use
the app "reface capture", which is described at the end of this guide for all reface models.
if you return a Voice saved in this way to the reface cs, it is very likely that there is no relationship between the actual
sound and the current positions of the sliders. and there's no visual indication of the current values - apart from the
oscillator. with a little time, you can reconstruct every slider position by moving one by one through its value range.
otherwise, just as in the early days of synthesizer history, a piece of paper and a pen helps. even and especially if you are
traveling, perhaps with battery operated reface, but without ios device.
on the next page four examples show how this might look - so ge ahead and try to re-program those sounds!
yamaha.com 10