Replacing The Fuse - Yamaha XT600E 2000 Owner's Manual

Table of Contents

Advertisement

PERIODIC MAINTENANCE AND MINOR REPAIR
To charge the battery
Have a Yamaha dealer charge the
battery as soon as possible if it
1
seems to have discharged. Keep in
mind that the battery tends to dis-
2
charge more quickly if the motorcycle
is equipped with optional electrical
accessories.
3
To store the battery
4
1. If the motorcycle will not be used
for
more
than
5
remove the battery, fully charge
it, and then place it in a cool, dry
6
place.
2. If the battery will be stored for
7
more than two months, check it
at least once a month and fully
8
charge it if necessary.
3. Fully charge the battery before
installation.
9
4. After installation, make sure that
the battery leads are properly
connected to the battery termi-
nals.
cC
8 Always
charged. Storing a discharged
battery can cause permanent
battery damage.
8 To charge a sealed-type (MF)
battery, a special (constant-
voltage) battery charger is
required. Using a conventional
battery charger will damage
one
month,
the battery. If you do not have
access to a sealed-type (MF)
battery
Yamaha dealer charge your
battery.
EC000102
keep
the
battery
charger,
have
a
6-29
1. Fuse
2. Spare fuse

Replacing the fuse

The fuse holder is located behind
panel A. (See page 6-6 for panel
removal and installation procedures.)
If the fuse is blown, replace it as fol-
lows.
1. Turn the key to "OFF" and turn
off all electrical circuits.
2. Remove the blown fuse, and
then install a new fuse of the
specified amperage.
Specified fuse:
20 A
1
2
EAU01307

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xt600en 2000

Table of Contents