Yamaha NMAX GPD155 2020 Owner's Manual page 26

2. While pushing the
switch, turn the vehicle on.
3. Continue to push the "MENU"
switch until the display unit setting
screen comes on (approximately 5
seconds).
4. Push the "MENU" switch once to
switch the display units.
5. Push the "MENU" switch for 1
second to con rm the setting.
The speedometer shows the vehicle's
traveling speed.
1
1. Fuel meter
The fuel meter indicates the amount of
fuel in the fuel tank. The display seg-
ments of the fuel meter disappear from
"MENU" "F" (full) towards "E" (empty) as the fuel
level decreases. When approximately
1.7 L (0.45 US gal, 0.37 Imp.gal) of fuel
remains, the last segment starts ash-
ing. Refuel as soon as possible.
If a problem is detected in the electrical
circuit, the fuel level segments will ash
repeatedly. If this occurs, have a
Yamaha dealer check the vehicle.
1. Clock
The clock uses a 12-hour time system.
To set the clock
EAU86851
1
1. Coolant temperature meter
This meter shows the temperature of
the coolant, and thereby the condition
of the engine. The segments come on
from "C" (cold) to "H" (hot) as the en-
gine temperature increases. If the hot
5-4
1. Push the "MENU" switch until the
hour digits start ashing.
2. Use the "MENU" switch to set the
hours.
3. Push the "MENU" switch until the
minute digits start ashing.
4. Use the "MENU" switch to set the
minutes.
5. Push the "MENU" switch until the
minute digits stop ashing. The
setting is con rmed.
EAU86860
1