Fisher & Paykel ACTIVESMART RF605QDU User Manual page 66

WATER CONNECTION (ICE & WATER MODELS)
5
6
7
8
20
Insert the short tubing into the water
tap adaptor, push tubing in at least
16mm before reaching the stop.
Pull gently on the short tubing to
ensure it is locked in place.
If the short tubing is already attached
to the tap adaptor, move to step 6.
Insert the other end of the short
tubing firmly to the PLV.
Fasten the water tap adaptor to the
isolation tap. Take care not to over-
tighten the water tap adaptor.
Pull gently on all tubing connections
to ensure they are locked in place.
Turn isolation tap on and check
that all connections are dry and free
of drips.
Before first use, you need to flush
water through the filter to remove
impurities or trapped air in the water
tank and filter system.