Yamaha PSR-48 Authorized Product Manual page 52

1. Remote Control/ Standard Voice
Mode Selection
The Remote Control mode should be
used when the PSR-48 is to be
connected to a second keyboard or
tone generator which it is to control. In
this mode, the PSR-48 can only
receive on a single MIDI channel.
The Standard Voice mode should be
used when the PSR-48 is to be used
as a tone generator, for example,
receiving data from a second MIDI
device (such as a sequencer). In this
mode the PSR-48 can receive on
multiple MIDI channels, each channel
corresponding to a different voice.
to "MIDI Channel Selection"
* Refer
below for more information on MIDI
channels.
setting has no effect when the
* This
PSR-48 is used for transmission
only.
number of notes that can be
* The
played simultaneously via external
control when the Standard Voice
mode is selected: 8 melody, 7
rhythm.
2.3. MIDI Channel Selection
The MIDI transmit and receive
channels can be set independently.
* The transmit channel is
automatically set to channel 1 and
the receive channel is automatically
set to OMNI OFF + channel 1 when
the power is initially turned ON.
* OMNI ON means that reception can
occur simultaneously on all
available channels (1 through 16).
When OMNI OFF is selected,
reception only occurs on the
specified channel.
4. Split Transmit Mode ON/ OFF
Selection
If the SPLIT Transmit Mode is turned
ON, lower and upper keyboard notes
played in the Single Finger, Fingered
or Split modes are transmitted on
different MIDI channels, and can thus
be used to control different MIDI
devices.
5 0