Environmental Conditions And Power Requirement Specifications For Cisco 10-Gbps Fibre Channel X2 Transceivers; Cisco 10-Gbps Ethernet X2 Transceivers - Cisco MDS 9200 Series Installation Manual

General Specification for Cisco 10-Gbps Fibre Channel X2 Transceivers
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Environmental Conditions and Power Requirement Specifications for Cisco 10-Gbps Fibre Channel
X2 Transceivers
Table B-10
transceivers.
Table B-10
X2
DS-X2-FC10G-SR
DS-X2-FC10G-LR
DS-X2-FC10G-ER
DS-X2-FC10G-CX4 is not an optical module; therefore, it is not listed in
Note
Table B-11
transceivers.
Table B-11
X2
DS-X2-FC10G-SR
DS-X2-FC10G-LR
DS-X2-FC10G-ER
DS-X2-FC10G-CX4
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance
and Safety Information for the Cisco MDS 9000 Family.

Cisco 10-Gbps Ethernet X2 Transceivers

Table B-12
Table B-12
Transceiver Module
Product Number
DS-X2-E10G-SR
Cisco MDS 9200 Series Hardware Installation Guide
B-8
provides the power requirement specifications for Cisco 10-Gbps Fibre Channel X2
Power Requirement Specifications for Cisco 10-Gbps Fibre Channel X2 Transceivers
Average Transmit
Power (dBm)
Maximum Minimum
-1.2 -7.3
0.5 -8.2
4.0 -4.7
provides the environmental specifications for the Cisco 10-Gbps Fibre Channel X2
Environmental Specifications for the Cisco 10- Gbps Fibre Channel X2 Transceivers
Operating
Maximum
40°C
40°C
40°C
40°C
lists the Cisco 10-Gbps Ethernet X2 transceivers.
Cisco 10-Gbps Ethernet X2 Transceivers
Description
10-Gbps Ethernet Short Reach, X2, SC
Average Receive
Power (dBm)
Maximum Minimum
-1.0 -9.9
0.5 -14.4
-1.0 -15.8
Storage
Minimum Maximum
0°C 85°C
0°C 85°C
0°C 85°C
0°C 85°C
Appendix B Technical Specifications
Fiber Loss Budget (dBm)
2.6 (50.0 micron-OM3)
6.2
11.1
Table B-10.
Minimum
-40°C
-40°C
-40°C
-40°C
Type
Short reach
OL-19588-01