Triplog; Options - Humminbird Wide Optic Operation Manual

Triplog

Triplog provides a running log of information based on input from the Temp/Speed sensor. Since Triplog
requires information from the Temp/Speed sensor to operate, if this sensor is not detected by the Wide
Optic, the Triplog menu will not appear as an option.
To enable Triplog, press MENU repeatedly until the Triplog menu is on-
screen. The Factory Setting is "Hide" which is selected. Use the DOWN
ARROW to select "Show" and the fullscreen Triplog will appear.
Triplog provides seven pieces of information; the current digital depth,
water surface temperature, current boat speed, the distance traveled
since the Wide Optic was powered up or reset, the average speed, the
total time elapsed since power-up or reset, and the input voltage from
your boat's electrical system.
The time, speed, and distance calculations are useful for tracking your
progress on a trip. The input voltage is useful for determining the
condition of the charging system of the boat. When used in a portable
application or whenever the Wide Optic is operated from a battery
source, the voltage number can be used to determine battery life. The
Wide Optic will operate at voltages from 10 to 16 VDC. Voltages in
excess of 16 or less than 10 VDC will cause the unit to power off.
Once Triplog is enabled, pressing MENU to bring the Triplog menu on-screen now shows an additional
option, "Reset". By selecting Reset, the timer and distance log resets to 0 and the Triplog will begin to
calculate elapsed time, distance traveled, and average speed from the time of reset.
To disable Triplog, press the MENU button until the Triplog menu is on-screen. Use the UP ARROW to
select Hide and let the menu time out. The Triplog continues to operate and log time and distance even
when it is not visible onscreen. The Triplog resets at power off.

Options

The Options Menu is actually a series of linked menu functions which are used initially to select user
preferences. Once user preferences are selected, it is unlikely that these functions need to be accessed
during the normal operation of the product.
The Options menu works differently than other menu functions in that all of the options must be cycled
through in order to return to normal operation. There are six Option menus: Units, Fish ID, Numeral size,
Transducer, Display speed, and Reset.
Press MENU until the Options menu is on-screen. There are two choices, Hide (Factory Setting) and
Show. Use the DOWN ARROW to highlight Show and the first Options menu appears.