Yamaha Vector RS90RX 2008 Supplementary Service Manual page 32

REAR SUSPENSION
Adjustment steps:
• Remove the stopper band bolts
washers.
• Adjust the length of the stopper band
inserting the bolts in different holes.
Standard setting:
No. 2 holes
1. Tighten the stopper band nuts.
Stopper band nut:
4 Nm (0.4 m•kg, 2.9 ft•lb)
Choosing other settings:
CAUTION:
The standard settings work well under
most general riding conditions. The sus-
pension can be adjusted to work better in
one condition, but only at the expense of
another. Keep this in mind when you adjust
the suspension.
No. 5 hole
(shortest)
More weight on skis:
• Heavy steering/
oversteer
• More maneuver-
ability
Favors: hardpack
snow, ice, smooth
trails, tight turns
27
INSP
ADJ
, nuts and
by
No. 1 hole
(longest)
Less weight on skis:
• Light steering/
understeer
• Better acceleration
and speed
Favors: deep snow,
straight line acceler-
ation, top speed