Table of Contents
Advertisement
FUSE INSPECTION
2. Replace:
• Blown fuse
Replacing steps:
• Set the main switch to "OFF".
• Install a new fuse of the correct amperage.
• Set the main switch to "ON" and verify if the
electrical circuit is operational.
• If the fuse immediately blows again, check
the electrical circuit.
Item
Main fuse
Headlight fuse
Signal fuse
Ignition fuse
Carburetor
heater fuse
DC terminal
fuse
Reserve fuse
Reserve fuse
WARNING
Never use a fuse with an amperage other
than that specified. Improvising or using a
fuse with the wrong amperage rating may
cause extensive damage to the electrical
system, cause the lighting, ignition, grip
warmer, signal and meter systems to mal-
function and could possibly cause a fire.
10
INSP
ADJ
Amperage
Q'ty
30 A
1
20 A
1
10 A
1
20 A
1
20 A
1
3 A
1
20 A
1
10 A
1
3 A
1
30 A
1
Advertisement
Table of Contents
