Wideside® Sensitivity (Advanced: With Wideside® Transducer) - Humminbird 788c Operation Manual

WideSide® Sensitivity adjusts the sensitivity of the WideSide® beam.
Increasing the sensitivity will display additional weak returns, and decreasing
the sensitivity will display few weak returns.
A WideSide® transducer must be attached to the Fishing System. The
WideSide® Sensitivity menu choice is available when Transducer Select is set
to WideSide® (see Sonar Menu Tab: Transducer Select) and User Mode is set
to Advanced (see Setup Menu Tab: User Mode).
NOTE: The WideSide® Sensitivity requires the purchase of the WideSide® transducer. You can
visit our web site at www.humminbird.com to order this accessory online or contact our
Customer Resource Center at 1-800-633-1468.
WideSide® Sensitivity is particularly useful for adjusting the sensitivity of the
455 kHz sonar returns in the WideSide® View. The 455 kHz sensitivity can be
adjusted without affecting the sensitivity of the other sonar frequencies.
To change the WideSide® Sensitivity setting:
1. Make sure User Mode is set to Advanced and that WideSide® is
selected under the Sonar Menu Tab: Transducer Select setting.
2. Highlight WideSide® Sensitivity on the Sonar Main Menu.
3. Press the LEFT or RIGHT Cursor keys to change the WideSide®
Sensitivity. (-10 to +10, Default = 0)
WideSide® Sensitivity
(Advanced: with WideSide® transducer)
117 Sonar Menu Tab