Cisco InfiniBand SFS 7000 Quick Start Manual page 32

10
NOTE: If your host does not provide an ample amount of free space around a given IB port,
double-check that your IB cable connector engages fully. Wiggle your connector back and forth to be
sure that both sides of the connector have locked firmly into place.
c. To remove a cable with a pinch connector, pinch both sides of the back of the connector and
pull the connector away from the port.
Figure 1-12: Removing a Pinch Connector
d. To remove a cable with a pull connector, grasp the connector with one hand and push it toward
the port, then pull the latch away from the port with your other hand and gently wiggle the
connector away from the port.
1. push connector toward port
2. pull latch away from port
Figure 1-13: Removing a Pull Connector
3. pull connector away from port