Installing The Switch With Two People - Cisco InfiniBand SFS 7000 Quick Start Manual

8. Secure the switch with your screws through the front of the rack, as show in
Figure 1-6: Secure switch with screws through the front of the rack

Installing the Switch with Two People

The following method of installation requires two people to mount the chassis into the rack. One person
holds the switch while another person secures it to the rack.
1. Separate the assembled rack brackets.
Mount bracket with screw
holes to switch
Figure 1-7: Separate Assembled Brackets before Mounting onto Switch
2. Attach the rack bracket that has the screw holes to the sides of the switch chassis with the screws
provided.
When attaching the rack brackets to the switch, the flanges of the brackets should be facing away
from the switch chassis, as shown in
Figure 1-8: Fasten Rack Bracket to Switch Chassis
3. Assemble rack brackets to their counterparts before inserting the switch into the rack.
Separate Assembly
Figure 1-8.
Figure 1-6.
Orient flanges away from
switch chassis
b
5