Operation; Ⅱ. Setup Of The Welding Current; Ⅲ.welding Parameter List. (For Low-Carbon Steel) - Yeswelder MIG PRO-200 User Manual

6. Operation

Ⅰ.
Ⅱ. Setup of the Welding Current
The welding current and arc voltage have a direct influence on the stability, quality and efficiency
of welding. So a good coordination of the welding current and arc voltage is required for a high
quality welding. It is decided by the diameter of welding wire, mode of droplet transfer and requirement of
welding efficiency. Regarding the setup of current and voltage for general welding, please consult the form
below. Regarding the different welding requirement, please refer to the "Zoom Table of Welding Parameter".
Ⅲ.Welding Parameter List. (For Low-carbon Steel)
Welding diameter(MM)
1.0
1.6
2.0
Recommended welding current (A)
20-60
44-84
60-100
Recommended welding voltage (V)
20.8-22.4
21.76-23.36
22.4-24