Fisher & Paykel WASHSMART WA1060E Installation Manual/User Manual page 17

Hide thumbs Also See for WASHSMART WA1060E:

Table of Contents

GETTING STARTED QUICKLY – WASHSMART™ WASHER

Using your washer

The buttons require only a gentle touch to activate.

Touch 'POWER'

Select your desired wash cycle by gently touching the wash cycle button of your

choice (refer to 'Wash cycles' section).

Choose your wash options, eg you may want a 'Warm' wash temperature and a 'Slow'

spin speed (refer to the 'Wash options' section).

Touch

to start the cycle. The washer will start to fill with water and select the

correct wash action for your load.

For best fabric and colour care, remove your clothes as soon as the cycle has finished.

Use 'Keylock' mode to lock the buttons on the display, which prevents them from

being activated accidently by a washing basket or little fingers (refer to the 'Washer

controls' section).

'Delay Start' allows you to delay the start of your wash by 5 mins up to 18 hours (refer

to the 'Wash options' section).

If you wish to stop your WashSmart™ washer

Touch

●

During a spray rinse or spin, there will be a slight delay while the bowl slows to a stop

and the lid is unlocked.

IMPORTANT!

Failure to follow the advice in this guide may result in damage to your garments, and

your expectations of wash performance may not be met.

to activate your WashSmart™ washer.

Table of Contents