ENGLISH
(Original instructions)
Additional Safety Instructions for
This Appliance
Install the unit on flat and hard floor
♦
to diminish vibration or noise.
Always operate the appliance on a
♦
smooth, even, stable surface. Do
not place the unit on a hot surface.
Arrange the cable such that it is not
♦
a trip hazard.
Ensure that the unit is switched off
♦
after use.
Do not immerse cables, plugs or
♦
any part of the appliance in water
or any other liquid.
Operate the unit only at the voltage
♦
specified.
Do not use the unit near open
♦
windows, as contact with rain and
other natural elements could cause
an electrical hazard.
Do not put heavy objects on the
♦
appliance.
Do not tip the unit on its side.
♦
Never insert any other object into
♦
the unit body to avoid any hazard
or unit failure.
Do not put the unit close to
♦
heat-generating devices or
near flammable and dangerous
materials.
Do not use near or point the heater
♦
towards furniture, animals, curtains
or other inflammable objects. Keep
combustible materials, such as
furniture and bedding, at least 1
metre from the front, sides, and
rear of the heater.
6
Do not place the cord under carpet,
♦
rugs or furniture. The unit is also
fitted with a tip over switch. Do not
use on thick and long pile carpets,
as the tip over switch may not been
activated.
If the supply cable is damaged,
♦
it must be replaced by the
manufacturer or its service agent or
a similarly qualified person in order
to avoid a hazard.
For optimal airflow circulation,
♦
leave a distance of at least 1 metre
around the appliance on every side.
Always direct the airflow in order
♦
to optimise heating. Avoid corners,
small objects and other surfaces
or objects which may impede the
airflow.
The appliance must be positioned
♦
so that the plug is accessible.
Always turn the heater off and
♦
unplug it from the mains before
attempting to move it. Due to the
presence of hot parts, hold the
heater only by the handle provided.
WARNING: Do not place the unit
on or near a hot gas electric burner.