Pioneer AVH-P6300BT/XNUC Service Manual page 98

1
-How to remove the PU unit
A
1. Set the mechanism to the locking position (disc load standby position).
2. Set the ceiling surface of the mechanism module downward.
3. Short-circuit two parts of lands of the pickup flexible part. (Fig. 1)
4. Remove the connector of the pickup flexible part. (Fig. 2)
(The flexible part is damaged if the board is removed without removing the flexible part, so be sure to remove it.)
Fig. 1
B
Short circuit
Connector
(pickup flexible part)
C
1. Unscrew two screws and remove the CRG motor ASS'Y.
D
E
F
98
1
2
CRG motor ASS'Y
Locking screw (CRG)
AVH-P6300BT/XNUC
2
3
Fig. 2
Locking screw (CRG)
Fig. 3
3
4
4