Removal steps of the built-in battery
Step
Screw (quantity)
3
M1.6 × 2.5 mm, flat-head, nylon-coated (3)
When installing:
• Ensure that the connector is attached firmly.
• Ensure that the base cover assembly is secured in place. Otherwise, the battery connection may fail.
1030 Thermal bracket (for selected models)
For access, remove this FRU:
• "1010 Base cover assembly" on page 59
Torque
Color
Silver
0.1±0.015 Nm
(1.1±0.05 kgf-cm)
.
Chapter 8
Removing or replacing a FRU
61