Attaching The Rack-Mount Brackets - Cisco Catalyst 2975 Hardware Installation Manual

Installing the Switch
Figure 2-9
23/24 inch

Attaching the Rack-Mount Brackets

First remove the screws from the switch chassis so that the mounting brackets can be attached
(Figure
position.
Figure 2-10
Catalyst 2975 Switch Hardware Installation Guide
2-10
Rack-Mounting Brackets
19 inch
ETSI
2-10). For bracket attachment, remove one or two screws, depending on the bracket mounting
Removing Screws from the Switch
C at al ys t 29
75 G
Se rie s
Po E- 48
Chapter 2 Switch Installation
OL-17784-01